Consent Calendar: OGB Meeting — 4 June 2026

No objection to concept approval for new two-story garage at alley, per supplemental materials received 1 June 2026, PROVIDED the overall height of the structure is reduced by a minimum of 18 inches. File new submission at DOB with detailed and dimensioned drawings for review by the Commission.

No objection to issuance of permit for rear addition, storefront redesign, and alterations, per supplemental materials received ___ May 2026, PROVIDED all windows on M Street are single-glazed wood windows per the OGB guidelines, all trim at storefront is painted wood (no PVC or other plastic), and all conduits and wiring is removed or concealed. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit to replace three sets of aluminum-frame sliding windows in kind on the one-story structure at the rear of the property, per supplemental materials received 21 May 2026. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for Repointing and installation of parging on brick wall, per supplemental materials received _ June 2026, PROVIDED a mortar analysis specific to this wall section is be completed to confirm the appropriate type for both the mortar and parging and natural hydraulic lime (NHL) 3.5 is considered for both the mortar and parging; the paint must be carefully removed with an alkaline or an organic paint remover with a natural bristle brush and not a metal brush; a low-pressure wash must be used to avoid further damage to the fragile brick and mortar; if the mortar analysis concludes that cementitious mortar is too hard than any existing mortar that contains cement should be carefully removed with hand tools before the joints are repointed and the parging is applied; the proposed parging must not be painted; any coping to be removed at the top of the wall must be replaced in kind; and the contractor and the forensic team must submit the products and specifications to be used. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit first and third floor additions with wood lap siding with flat-seam metal roofing at the dormer ends and the replacement of the hand-crimped double lock metal roof, per supplemental materials received _ June 2026, PROVIDED the applicant includes detailed cross sections for each window type to confirm they would comply with the Board's Window Policy and Guidelines and are single glazed and true-divided lite with putty profile muntins and clear glass with no low-emissivity coatings; the applicant confirms that all trim and lap siding would be painted wood and all references to PVC and Hardie are removed; label the dimension of the proposed exposure of the metal siding on the gable ends; include a detail or specification to confirm the proposed skylights would be flat; include a roof detail to confirm the new and replacement roofing would be hand-crimped, double-locked metal with no ridge cap; and confirm the proposed gutters would be half-round metal and the downspouts would be round metal to match the existing. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit to install a 12-inch tall aluminum letter sign that reads "Joe & the Juice," per supplemental materials received _ June 2026, PROVIDED the threaded rods are anchored in mortar joints. Any other signage, including window decals, have not been reviewed as part of this application and must be submitted as part of a separate application prior to installation. No gooseneck lights have been reviewed and recommended for approval. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit to replace the TPO roof, skylights, gutters, and downspouts, per supplemental materials received _ June 2026, PROVIDED the replacement skylights are flat and the applicant provides specifications to confirm and the profile of the fascia is maintained and the color matches the white trim and is noted accordingly on the plans. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for non-illuminated, pin-mounted letter sign on the projecting bay, as well as vinyl letters on the door, for Suit Shop, per supplemental materials received ___ May 2026, which indicate the hanging sign was removed from the scope, and the wall sign is installed at the mortar joints. No other vinyl signage shall be installed. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for fenestration alterations and railing replacement, per materials received 15 May 2026, which indicate windows on the north elevation of the ell align with the openings above, existing windows are retained and not replaced, and the railing at the second floor of the ell matches the railing design elsewhere on the building, PROVIDED brick is salvaged from new openings for infill areas, mortar is matched, and the windows comply with the OGB guidelines. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for installation of solar panels on the roof, per supplemental materials received ___ June 2026, which indicate all equipment and conduits would be installed at the rear elevation. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for an illuminated wall sign reading "Flavor Hive," per supplemental materials received ___ May 2026, PROVIDED the overall height of the letters is no taller than 12", and the letters are installed on a back board. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for window restoration and alterations at McNeir Auditorium at Georgetown University's New North, per supplemental materials received _ June 2026, PROVIDED the north elevation (A4.0) is updated to include the proposed condensing unit and platform; a cross section of the proposed vent at B29 and the existing vent above Window B31 is provided to confirm they would match; salvage the removed transom and store it on site in case it could be reinstalled in the future; Door 1A should include lites to match the shape and proportions of the historic sash windows; and provide a cross section to confirm the door is single glazed and has clear glass with no lo-emissivity coating in compliance with the Board's Window Policy and Guidelines. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for rooftop solar on the Nolan Center for the Performing Arts, per mockup completed 27 May 2026 and supplemental materials received _ June 2026, PROVIDED the applicant confirms there are 114 panels proposed on the numbered panel sheets (PV-1, PV-2A, E-1); paint the metal trim skirt in flat black paint; provide a scaled detail for a flat roof that includes the trim skirt, panels at a 5-degree angle, and dimensions for the Pegasus S base ballast mount and Solarpod Z-Rack systems; remove all references to Znshine panels, which would not be installed on the roof; and confirm no conduit is to be visible on the front or side-facing roof downslopes. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for the installation of signage for The Ledger, per supplemental materials received 22 May 2026, PROVIDED the applicant return at a later date with an application to remove the existing light and conduits associated with a former sign and install a new light source. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of revised permit for rooftop addition and renovation, per supplemental materials received ___ May 2026, which indicate a change in window manufacturer, replacement window material, and number of windows to be replaced, PROVIDED Sheet A.01 is updated to show which windows are to be restored versus replaced, detailed dimensions are provided for both existing and proposed windows for comparison, and the first-floor windows at the front elevation are restored as indicated. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for a garage addition, construction of four dormers, and installation of three half round windows, per the supplemental materials received _ June 2026, PROVIDED the windows proposed on the front elevation are clear and do not have a low-emissivity coating. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to concept approval for fenestration replacement and new shutters, per supplemental materials received ___ May 2026, PROVIDED the existing windows are retained, operable wood shutters are installed, and existing exterior light fixtures are retained. File new submission at DOB with detailed and dimensioned drawings for review by the Commission.

No objection to revised concept design for the construction of single-family house on vacant lot, per supplemental materials received 28 May 2026, PROVIDED all windows are to be true divided lite wood; reconsider the proposed “porkchop” eave returns on the rear block; salvage the brick on the existing retaining wall to be reused in its replacement; consider a single lite at the front door; improve the chimney cap designs; and study the potential catchment area in the middle block. File permit submission at DOB with detailed and dimensioned drawings for review by the Commission.

No objection to permit submission for demolition of existing structure and construction of new two-story recreation building, per supplemental materials received _ June 2026, PROVIDED the applicant confirms on the plans the brick proposed for the pool equipment enclosure would match the brick proposed on the recreation building; information is included on the crash rating of the bollards; landscaping is included at the base of the pool equipment enclosure building; as many large caliper trees are added on the site as possible; information is included on the proposed light poles, including materials and heights and the rooftop solar is reviewed as part of a separate application.